Need help with webapp update

[kevin]

Can you do me a favor and try bypassing nginx by going to port 5000 - http://alarmdecoder.local:5000 and see if the problem persists? There was a new nginx config in the contrib directory and wondering if that is the issue.

[pyrodex]

Can you do me a favor and try bypassing nginx by going to port 5000 - http://alarmdecoder.local:5000 and see if the problem persists? There was a new nginx config in the contrib directory and wondering if that is the issue.

Done. I get the following:

Code: Select all

Forbidden Page
It looks like this was the result of:

*no permission


[JJsLegacy]

Port 5000 indeed works fine for me


http://10.10.10.75:5000/keypad/ - showing correctly

[pyrodex]

Port 5000 indeed works fine for me


http://10.10.10.75:5000/keypad/ - showing correctly

Interesting... I get redirected to /setup/test on mine.

[kevin]

Ok, try replacing the nginx config from /opt/alarmdecoder-webapp/contrib/nginx/alarmdecoder and replace the /etc/nginx/sites-available/alarmdecoder with that (sudo cp /opt/alarmdecoder-webapp/contrib/nginx/alarmdecoder /etc/nginx/sites-available/alarmdecoder && sudo /etc/init.d/nginx restart)

[kevin]

Port 5000 indeed works fine for me


http://10.10.10.75:5000/keypad/ - showing correctly

Interesting... I get redirected to /setup/test on mine.

If you clicked on setup and it didn't register as going through the process fully, then this is common.

[JJsLegacy]

Ran:

sudo cp /opt/alarmdecoder-webapp/contrib/nginx/alarmdecoder /etc/nginx/sites-available/alarmdecoder && sudo /etc/init.d/nginx restart

Tried website - no change still stuck at loading.

Tried rebooting just to be sure - still stuck at loading.

[kevin]

Well, give us some time to reproduce this and see if we can get a fix out - until then you can bypass nginx by going to port 5000 to use the keypad on non-working devices

[kevin]

Can you guys provide your nginx error logs from /var/log/nginx/error.log as well as the gunicorn logs in /var/log/gunicorn/alarmdecoder.log and the logs in /opt/alarmdecoder-webapp/instance/logs/info.log - let's see if we got any good information in there. Also, you guys did clear your sessions and cache etc after the upgrade?

[JJsLegacy]

I have cleared the cache and tried private browsing and deleting the certs - tried all I can think of.

I will e-mail them to you guys now.