128-BP(T)

[cfpsystems]

Wondering if anyone has the A2DUSB working with a 128-BPT. I see the 128BP in the compatibility list but not the "T". I put all the "cheater zones" in Vera and they all appear there but they never change state. I am able to arm/ disarm the system but as I saw on a previous thread have a keypad on my 2nd partition keypad is locked up (and not on a duplicate address as far as I can tell.

Thanks,
Charlie-

[mathewss]

I do not have a BPT but I really dont think its a problem. If you can arm/disarm etc etc then its just a matter of settings such as maybe the keypad mask etc.

Please connect to your AD2* using screens or ser2sock etc and dump your configuration settings by pressing C and then pressing enter.
also if you can please post some output from the panel I need to see if this second partition's keypad mask etc is causing any issues.

Re
Sean M

[recurry]

I have successfully used the AD2USB with the following:

21IP
FA1220CP
128FBP
250BP

It seems that as long as the board supports ECP it will work.

Cheers,
Ron