ssh into your Vera Edge as root
cd /usr/bin
rm Start_serproxy.sh
vi Start_serproxy.sh
<paste script below>
<save + exit (esc :wq enter)
chmod +x Start_serproxy.sh
restart luup
- Code: Select all
#!/bin/sh
# SVN : $Id: Start_serproxy.sh 8764 2013-07-31 12:58:27Z florin $
#Copyright (C) 2008 Mi Casa Verde, Inc., a Nevada Corporation
# www.micasaverde.com
# 1 - 702 - 4879770 / 866 - 966 - casa
#This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License.
#This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
#without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
InstID=$(cat /etc/cmh/PK_AccessPoint)
while [[ ! -f /var/run/cmh.stop ]]; do
# Intentionally done in-loop b/c the device might
# not be inserted at boot, and this will pick it up on Lua reload
ProdID=$(lsusb|awk -F '[: ]' '/0403/ { print $8; }')
rmmod ftdi_sio
insmod ftdi_sio vendor=0x0403 product=$ProdID
TTYNode=$(dmesg|awk '/ now attached to/ { print $NF; }'|tail -n 1)
kill $(ps ax|awk "/serproxy/ /!$$/ { print $1; } " 2>/dev/null) 2>/dev/null
kill $(ps ax|awk '/ser2net/ { print $1; }' 2>/dev/null) 2>/dev/null
sleep 5 # Give LuaUPnP some time to startup
echo "Running serproxy: /usr/bin/serproxy 127.0.0.1 127.0.0.1 $InstID /dev/${TTYNode}"
/usr/bin/serproxy 127.0.0.1 127.0.0.1 $InstID /dev/${TTYNode}
sleep 1
done
To put the original back in-place:
rm /usr/bin/Start_serproxy.sh
ln -s /mios/usr/bin/Start_serproxy.sh /usr/bin
restart luup
Thanks to user sound-mind @ http://forum.micasaverde.com/index.php/ ... #msg209964
