(→Ademco / Honeywell Systems) |
|||
| Line 5: | Line 5: | ||
[[Category:Features]] | [[Category:Features]] | ||
== Ademco / Honeywell Systems == | == Ademco / Honeywell Systems == | ||
| − | ; The AlarmDecoder was designed to work with any alarm from the Ademco/Honeywell Vista series from the 90's right up to the latest 2013 Honeywell Vista 21IP and more recently DSC Power | + | ; The AlarmDecoder was designed to work with any alarm from the Ademco/Honeywell Vista series from the 90's right up to the latest 2013 Honeywell Vista 21IP and more recently DSC Power series alarms. This document will help identify if a given panel is compatible with the AlarmDecoder. Many of these alarm panels were sold under different names branded by the alarm monitoring company for example '''Safewatch Pro 3000/3000CN''' which is actually a '''Vista 20P''' |
| − | * The Ademco LYNX Systems are NOT compatible as they do not support the 4 wire expansion bus the | + | * Note: The Ademco LYNX Systems are NOT compatible as they do not support the 4 wire expansion bus the AlarmDecoder connects to. |
| − | + | ; If '''after''' reading this you still are not sure if your panel is supported and are interested in the AlarmDecoder then send us an email with a picture of your alarm panel filling the full frame of your camera and we will check it out. (please provide a general statement of release of the photo as we may use them on the website to help others) | |
| − | ; If '''after''' reading this you still are not sure if your panel is supported and are interested in the AlarmDecoder then send us an email with a picture of your alarm panel filling the full frame of your camera and we will check it out. ( please provide a general statement of release of the photo as we may use them on the website to help others ) | + | |
===Keypads=== | ===Keypads=== | ||
| Line 37: | Line 36: | ||
===Panels=== | ===Panels=== | ||
| − | ; This is a partial list and many supported panels were sold under different names and model numbers so here are some tips | + | ; This is a partial list and many supported panels were sold under different names and model numbers so here are some tips for seeing if your panel will be compatible. |
; Look for a large wiring sticker inside the panel enclosure that shows the word(s) "Vista" "Ademco" "Honeywell" | ; Look for a large wiring sticker inside the panel enclosure that shows the word(s) "Vista" "Ademco" "Honeywell" | ||
| Line 54: | Line 53: | ||
==DSC Systems== | ==DSC Systems== | ||
| − | ; | + | ; We now support the DSC Power series alarm panels. This requires beta [[:Category:Firmware|firmware 2.2a.8 or later]] This is still in beta and new features are being added every month. |
===Panels=== | ===Panels=== | ||
{| summary="Examples of supported DSC panels" | {| summary="Examples of supported DSC panels" | ||
Revision as of 11:43, 12 December 2013
Contents |
Ademco / Honeywell Systems
- The AlarmDecoder was designed to work with any alarm from the Ademco/Honeywell Vista series from the 90's right up to the latest 2013 Honeywell Vista 21IP and more recently DSC Power series alarms. This document will help identify if a given panel is compatible with the AlarmDecoder. Many of these alarm panels were sold under different names branded by the alarm monitoring company for example Safewatch Pro 3000/3000CN which is actually a Vista 20P
- Note: The Ademco LYNX Systems are NOT compatible as they do not support the 4 wire expansion bus the AlarmDecoder connects to.
- If after reading this you still are not sure if your panel is supported and are interested in the AlarmDecoder then send us an email with a picture of your alarm panel filling the full frame of your camera and we will check it out. (please provide a general statement of release of the photo as we may use them on the website to help others)
Keypads
- The AlarmDecoder is compatible with any alarm that is also compatible with one of these Ademco/Honeywell keypads.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
6128 | 6128RF |
Panels
- This is a partial list and many supported panels were sold under different names and model numbers so here are some tips for seeing if your panel will be compatible.
- Look for a large wiring sticker inside the panel enclosure that shows the word(s) "Vista" "Ademco" "Honeywell"
- Looc on the panel for words like "SAVS" and a series of numbers like "SAVS20P5" or "SAVS10SECE"
 |
 |
 |
 |
 |
- Vista 15P
- Vista 10P
- Vista 20SE
DSC Systems
- We now support the DSC Power series alarm panels. This requires beta firmware 2.2a.8 or later This is still in beta and new features are being added every month.
Panels
 |
 |
 |
 |