Latest revision as of 18:23, 9 August 2021

AlarmDecoder AD2IoT(Internet Of Things)

currently the only supported configuration mechanism is using the USB port on the AD2IoT and a serial terminal program.

Download appropriate USB driver from https://www.olimex.com/Products/IoT/ESP32/ESP32-POE-ISO/open-source-hardware
Connect with the new COM port using a terminal program using the baud rate of 115200.
- Example of connecting using Putty as a terminal client to the AD2IoT [picture here]
Enter commands starting with 'help' to see a list of the available commands on the installed firmware release. [picture here]
- See 'https://github.com/nutechsoftware/AlarmDecoder-STSDK' for an explanation of the commands and configuration options.
Recommend starting with 'ad2term' to configure AD2IoT see 'https://www.alarmdecoder.com/wiki/index.php/Protocol' for details

@@ Line 9: / Line 9: @@
 ;
 ===Features===
-*
+== Configuration ==
+; currently the only supported configuration mechanism is using the USB port on the AD2IoT and a serial terminal program.
-==Installation==
+* Download appropriate USB driver from https://www.olimex.com/Products/IoT/ESP32/ESP32-POE-ISO/open-source-hardware
-;
+* Connect with the new COM port using a terminal program using the baud rate of 115200.
-==Initial Setup==
+** Example of connecting using Putty as a terminal client to the AD2IoT [picture here]
-;
+* Enter commands starting with 'help' to see a list of the available commands on the installed firmware release. [picture here]
+** See 'https://github.com/nutechsoftware/AlarmDecoder-STSDK' for an explanation of the commands and configuration options.
-===Setup Process Detail===
+* Recommend starting with 'ad2term' to configure AD2IoT see 'https://www.alarmdecoder.com/wiki/index.php/Protocol' for details
 ==Disclaimers==
 ; All other trademarks are the property of their respective owners.