(→2.2a.8.3b) |
(→2.2a.8.3b) |
||
| Line 3: | Line 3: | ||
==2.2a.8.3b== | ==2.2a.8.3b== | ||
* Initial VPLEX support | * Initial VPLEX support | ||
| − | ** Connect V+ to 12V V- to GND and V+ to DI and | + | ** Connect V+ to 12V V- to GND and V+ to DI and make sure config mode is Ademco. |
*** NOTE: only possible to connect to one BUS at a time for now so an additional AD2* is needed to monitor the VPLEX bus. | *** NOTE: only possible to connect to one BUS at a time for now so an additional AD2* is needed to monitor the VPLEX bus. | ||
* improved re-transmit handling with Ademco/Vista | * improved re-transmit handling with Ademco/Vista | ||
Revision as of 14:58, 13 October 2015
Contents |
Beta Releases
2.2a.8.3b
- Initial VPLEX support
- Connect V+ to 12V V- to GND and V+ to DI and make sure config mode is Ademco.
- NOTE: only possible to connect to one BUS at a time for now so an additional AD2* is needed to monitor the VPLEX bus.
- Connect V+ to 12V V- to GND and V+ to DI and make sure config mode is Ademco.
- improved re-transmit handling with Ademco/Vista
Stable Releases
2.2a.8.2
- Bugfixes
- Settings allocation bug
- Notes
- Shipping in all units built after October 2015
2.2a.8.1
- New Features
- Missing DSC message
- First dotted quad revision
2.2a.8
- New Features
- DSC panel support
- Compass download/upload support
- Blinking LED now displays error codes.
- New message type '!ERR' which can be retrieved by sending an 'e' to the AlarmDecoder
2.2a.6
2.2a.4
- New Features
- Keypad Address Mask
- Long Range Radio (LRR) Emulation
- Message deduplication