(→Configure Notifications) |
(→Configure Notifications) |
||
| Line 94: | Line 94: | ||
[[File:Notification_types.png|400px|border|List of Notification Types]] | [[File:Notification_types.png|400px|border|List of Notification Types]] | ||
; Here is a list of all current supported notification types. | ; Here is a list of all current supported notification types. | ||
| + | |||
| + | |||
| + | |||
| + | [[File:Notification_common_settings.png|800px|border|List of Items to be Notified On]] | ||
| + | ; Here is a list of all of the events that can trigger a notification. You are able to select which ones you would like to see. You can also have different notification types alert you for different kinds of notifications. This interface is common to all notification types. | ||
| + | |||
| + | |||
| + | |||
| + | |||
===Email=== | ===Email=== | ||
Revision as of 10:48, 21 May 2015
Contents |
AlarmDecoder WebApp
Overview
- The official AlarmDecoder WebApp. Control your alarm system from your web browser on nearly any device. Supports all of the AlarmDecoder devices including the AD2USB, AD2SERIAL, and AD2PI.
Features
- Multiple User Accounts
- Web-based keypad for your alarm system
- Notifications on alarm events
- Per-user notifications
- IP Camera integration
- Supports all functionality of AlarmDecoder devices
- Configure your AlarmDecoder device
- Configure network sharing of your AlarmDecoder device
- The AlarmDecoder WebApp Keypad Interface
Installation
- The easiest way to install the WebApp is by downloading our pre-built Raspbian image here. However, you can follow the manual installation instructions provided on our github repository here
Initial Setup
- Once the AlarmDecoder WebApp is started (it can take some time to initially start) you may connect to the Application via a web browser and pointing the URL to http://alarmdecoder.local - if this name resolution fails and you are on a Windows System, please download Bonjour For Windows and try again. This will take you to our first setup screens which will be detailed below. The device is initially configured for DHCP.
IF YOU BOUGHT A BUNDLE FROM US, IT IS ALREADY SET UP. YOU ONLY NEED TO GO THROUGH SETUP IF YOU NEED TO CHANGE DEFAULT ADDRESS OF DEVICE OTHERWISE CHECK HERE FOR DEFAULT PASSWORDS AND CHANGE THEM ACCORDINGLY
Setup Process Detail
- This is your first setup screen when you first visit via your browser
- Click "Start!" to continue
- Next we will be taken to the device selection screen
- Here you are able to select what type of device (AD2USB, AD2SERIAL, AD2PI) as well as the device's location.
- #Local Device means the device is connected to the same computer running the WebApp
- #Network Device means you have already exposed an AlarmDecoder via ser2sock
Local Device
- If you choose Local Device, this next screen is what you are presented with
- Here you will choose your device path and baud rate, usually defaults are fine for the device you chose
- If you choose "Share AlarmDecoder on your network?" you will be taken to configure ser2sock shown below
- On this screen you are able to specify the path to your ser2sock configuration file, your hostname or IP address to listen on, as well as the ser2sock port to listen on. Defaults will work fine. SSL will force ser2sock into SSL mode - this is typically not needed for your internal network.
- ser2sock Port is different from the HTTP/WSGI ports - do not choose 80, 443, or 5000.
Skip to #Configure Device
Network Device
- If you chose network device instead of local device, you are presented with this screen instead
- If you have an AlarmDecoder device shared on your network already via ser2sock, here you can specify the hostname and port for the WebApp to connect to the shared device.
Configure Device
- Once you have told the WebApp what kind of device you have and where it is, you will be presented with a page to configure the AlarmDecoder device itself
- Make sure to set your address correctly! 31 for SE Panels, and for 20P Panels you will have to program an address spot into your panel and assign the AlarmDecoder the newly enabled address. See [Panel Configuration]
- After you have completed all of the above steps, you will be taken to a Device Testing screen
- If any of these tests fail, please make sure your device is configured properly and installed properly.
- Once the device is communicating properly, you will be redirected to a page to create an initial user to log in to the WebApp
- After you have created your user, feel free to login and use the WebApp!
Configure Notifications
- Once you are logged in, go to Settings and click on Notifications. From there, you can edit already configured notifications or click "New Notification" to create a new notification.
- This is the main interface for creating and listing notifications. Here you can choose to create new or edit existing notifications.
- Here is a list of all current supported notification types.
- Here is a list of all of the events that can trigger a notification. You are able to select which ones you would like to see. You can also have different notification types alert you for different kinds of notifications. This interface is common to all notification types.
Example Coming soon..
SMS via Twilio
Example Coming soon..
Google Talk
Example Coming soon..
Pushover.net
Example Coming soon..
Prowl
Example Coming soon..
NotifyMyAndroid
Example Coming soon..
Growl
Example Coming soon..
Custom URL POST
Example Coming soon..
Configure IP Cameras
Coming soon..
Add Users
Coming soon..
Configuring SSL
Coming soon..
Disclaimers
- All other trademarks are the property of their respective owners.