Contents |
Ademco / Honeywell Systems
- The AlarmDecoder was designed to work with any alarm from the Ademco/Honeywell Vista series from the 90's right up to the latest 2013 Honeywell Vista 21IP and more recently DSC Power seriers alarms. This document will help identify if a given panel is compatible with the AlarmDecoder.
- If after reading this you still are not sure if your panel is supported and are interested in the AlarmDecoder then send us an email with a picture of your alarm panel filling the full frame of your camera and we will check it out. ( please provide a general statement of release of the photo as we may use them on the website to help others )
Keypads
- The AlarmDecoder is compatible with any alarm that is also compatible with one of these Ademco/Honeywell keypads.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
6128 | 6128RF |
Panels
- This is a partial list and many supported panels were sold under different names and model numbers so here are some tips in seeing if your panel will be compatible.
- Look for a large wiring sticker inside the panel enclosure that shows the word(s) "Vista" "Ademco" "Honeywell"
- Looc on the panel for words like "SAVS" and a series of numbers like "SAVS20P5" or "SAVS10SECE"
 |
 |
 |
 |
 |
- Vista 15P
- Vista 10P
- Vista 20SE
DSC Systems
- The Power series alarm panels. This requires beta firmware 2.2a.8 or later This is still in beta and new features are being added every month.
Panels
 |
 |
 |
 |